Tang for cable installation
Krone LSA punch
40.00 kr
Varenummer LSA-PUNCH
Tang for cable installation
Krone LSA punch
Wall outlet with RJ45 female plug
STP "shielded Twisted Pair" shielded outlet
Krone LSA puncher is used for mounting cables
SFP Dust cap - blanking of unused port
Suitable for unused SFP slot
Protection against impurities
Flexible
Sold individually
Back piece for RJ45-PANEL front
Material: Plastic
Screw holes distance: 60mm
Color: White
Outer depth: 45mm
Inner depth: 43mm
Weight: 65g
RJ45 dust cap - blanking
Put into unused RJ45 port Kirke protection
flexible and fits all RJ45 ports.
Sold individually
RJ45 lock
RJ45 lock to stop accidental removal of the plug
Material: PLA (Plastic)
Dimensions: 15.5 x 13.8 x 18.3 mm
Crimping pliers for easy and fast production of cables
For RJ45 and RJ11 cable and modular connectors
The new connectors have wiring through for faster and secure mounting
When the cable is crimped on the connector, the cable ends are automatically cut by
Squeezes the conductors down the plug terminals and cuts the ends in the same workflow.
Single-Use RJ45 port lock in plastic to ensure network ports
Physical blockage of port
mounted and dismounted without tools
Serial number on each lock for identification and security
Dust cap/ Rubber plug/ blanking plug for RJ45 connector.
Suitable for Network equipment, PC, Mac, AV equipment, network switches etc
Easy to use
Mechanical lock for RJ45 ports with key
10 x Mechanical lock
1 x Key
Professional injector with light for cable identification.
Attach the light bulb at one end and in the opposite, the light will light.
Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS
Cooling fan for 5VDC 0.25A
40 x 40 x 10 mm
3-pin cable
5000 rpm
RJ45 m / f Ethernet Extension cable cat.5e 60 cm
PoE 802.3 at/af type a/b and non-standard PoE 5~60V
Measurement of cable length (2.5 ~ 200m). Accuracy: ±1.6m
Continuity test: Shows diagram of the conductors in the cable. Range: 600m
With special flash sequence, switch port can be identified
Can show speed on switch port.
Can show auto negotiate on switch.
Scan: Sends a tone over the cable that can be intercepted. Makes it easy to find the right cable, among other cables.
Battery: 3 x AAA, 1 x 9V (not included)
Cable insulation and crimping cable
Cable termination of RJ11, RJ12 and 8 pins RJ45
Cable review tests with LEDs included