Switch Mode Net adapter
12VDC 1000mA
DC plug 2.5mm jack connector, mono
128.00 kr
Varenummer DC12V100MA
Here you will find a large selection of b.la. Power Supplies, PSU and UPS. At Danbit offer power supplies for virtually all needs, everything from a standard PC power supply to a 12 volt power supply or ATX. Our staff has extensive knowledge and expertise in various installations including power supplies.
As a special offer Danbit laboratoie power. Power supplies that are ideal for test use and laboratory setups. See this category below. Should you be left with unresolved questions please contact us today.
Switch Mode Net adapter
12VDC 1000mA
DC plug 2.5mm jack connector, mono
Robust power supply, adjustable from 12-15VDC / 10AMB
for DIN mount
input 180-550VAC
output: 12VDC10 A (120W)
Contact output by power error
Screw terminal
Dim: 130 x 125 x 40mm (H x D x B)
operating temperature: -25 ° C - + 70 ° C
AC Adapter 100-240 VAC
12VDC, 0.42A
Regulated
Type A
Jack: 5.5 / 2.1mm
Cable: 1.8m
DK Connector (removable)
AC / DC power supply for DIN installation.
Input 115-230Vac
output 48VDC 3,75A (180W)
Adjustable from 41 to 55VDC
Red LED indikate DC out is OK
Screw terminals
Dimensions: 55 x 110 X 105mm
Operating temperature: -25 ° C - + 70 ° C
Top Class 3-phase 30.000VA / 30.000Watt Online UPS / back-up power
Input: 3 x 305 - 478VAC 50 / 60Hz
Output voltage: 3 x 380 - 415VAC 50Hz or 60Hz
backup time by 2 x extra Battery Bank: up to 30min at 50% load
LCD Display
three-phase
True sine wave - noiseless output voltage
Tower with Tower Battery Pack
Dimensions: 1000 x 815 x 300 mm
Weight: 225 kg
36W - 10500mAh battery
Same output voltage
Intervals: 12VDC, 15VDC, 19VDC, 24VDC
Power Jack adapter included
Power 48V
Idgangsspænding AC 100-240V
Output voltage DC 48V DC
5,5mm
48V DC ATX with 12V connector for P4, 2U
These power supplies can be used where the ordinary mains voltage (230 VAC) is not available - eg. in cars or on ships.
There can be supplied three types with +12 V, +24 V or -48 VDC input.
is equipped with EMI filter.
2200VA, 1350W 2U UPS, 19 "rack mounting
Simulated sine wave
During the 3-hour recharge time
Alarm v. Low battery and overvoltage mm
Connectors: 6 x IEC ed and 1 x IEC engrave.
Operating temperature: 0-40 °
Supports automatic shutdown via software
Incl. 4 x 12V 7Ah battery
Universal DC UPS 12 watts
Output Voltage: 5VDC / 7.5VDC / 9VDC or 12VDC
6 different DC Jack connectors included in 5200mAh (Li-Ion batteries)
Mini power bank for power supply in case of power failure
Battery capacity 7800mAh
5VDC / 1A output USB
12VDC / 2A output via Power Jack 5.5 / 2.5mm
Charging voltage is 12VDC - Purchase DC12V / 1.5ARQ
Singel Phase
Line-Interactiv
GreenPower UPS bypass Technology
230 ± 10%
Schuko
400VA
Overloadprotection
3 x schuko out
Runtime at 60W 28Min
Runtime at 90W 16 min
Sealed Lead-acid battery
Top class 3.0 kVA / 2.4 kW online UPS / emergency power
Input: 110-300 VAC 40Hz-70 Hz
Output voltage: 230 VAC / 50Hz
LCD Display
Single phase
Genuine Sine Curves - gives less noise on the output voltage
Rack / Tower 2 in 1
Built-in input OVCD
Foot / stand or for rack mounting
1 x IEC 320 C20 Terminal (input)
4 x IEC 320 C13 (output)
Approvals: IEC 62040-1 (safety) IEC-62040-2 (EMC)
DC input
Incl. battery pack: 6 x 12V / 55Ah
AC / DC power supply for DIN installation.
Input 115-230Vac
Output 12VDC 6A (72W)
Adjustable from 10 to 15.5VDC
Screw terminals
Goal: 50 x 120 X 50mm
Operating temperature: -25°C - +70°C
AT PSU 400 WATTS
1 X AT Power Switch
AT P8 and P9 connectors
4 x Molex 4 Pin
1 x Floppy 4 Pin
Trainee blower with ball bearing
115/230 Volt AC 60/50 Hz, SWITCH!
100,000 hours max load at +25°C
Incl. power cable
200 Watt ATX power supply, P4 connector. 24 pin ATX connector
200 Watt ATX power supply, P4 connector. 24 pin ATX connector
240W 48V DC Single Output Industrial DIN Rail Power Supply
Adjustable output from 48-55VDC/5Amp
100-240VAC input / full range
2 sets of DC clamps
Cooling by free air convection
For DIN rail mounting
LED indicator
Operating temperature -10 - +70°C
Dimensions: 125 x 100 x 125 mm
10 watt usb oplader til iPhone, iPad og andre usb enheder
Connect 2 pin connections to standard 3 pin fan adapter.