Measurement range: 0.00-14.00pH
Resolution / accuracy: 0.01pH
Calibration: Automatic 3-point calibration 6.8 & 4.00 & 9.18pH
Temperature: 0-60 ° C
Humidity: 100%

PoE 802.3 at/af type a/b and non-standard PoE 5~60V
Measurement of cable length (2.5 ~ 200m). Accuracy: ±1.6m
Continuity test: Shows diagram of the conductors in the cable. Range: 600m
With special flash sequence, switch port can be identified
Can show speed on switch port.
Can show auto negotiate on switch.
Scan: Sends a tone over the cable that can be intercepted. Makes it easy to find the right cable, among other cables.
Battery: 3 x AAA, 1 x 9V (not included)

Cable tester for fiber SC and RJ45

RJ45, RJ11 & SC cable tester

Up to 300m cable length RJ45

Cable test transmitter and receiver for single mode fiber optic

Tester Cat. 5, 5E, 6 and 7 network cables
Accuracy: ± 2m for cables under 10 meters, ± 5% for cables over 10 meters.
Test length for cables: 1 ~ 300 meters.
Tone Generator: Single / dual digital tone
Operating temperature: 0 ° C - 50 ° C
Storage temperature: -30 ° C - 50 ° C
Humidity: 10% - 90%

Cable Test Transmitter and receiver for multimode fiber optic

Portable Service monitor
AHD / TVI / CVI / CVBS coax in and out, HDMI in, VGA in. PAL / NTSC
12VDC 1A output for camera
800 x 480 (5: 3) 5 "TFT color screen.
Supports Pan-Tilt-Zoom Pelco-D / P PTZ via RS485
Supply: 5VDC via Micro USB-B connector.
5200 mAh battery, up to 11 hours battery life
Suitable for camera installers
Some IP cameras have CCTV output (BNC)
Cannot be used for IP cameras without BNC

2.5 1.25mm adapter
SC, ST, FC, LC
400x zoom
3xAAA battery
0.6kg
Laser Safty Filter

Easy to use
DIP switch for disconnecting and connecting signal (easy to connect external cables/props)
Branch too high signal
Red for low signal
RS232 8 signals DCD, RXD, TXD,, DTR, DSR, RTS, CTS, RI.

ESD Armbånd til afledning

Portable Field Strength Meter (100 MHz ~ 6 GHz)

Fiber cable tester for SC / FC / ST / E2000 plug types
The tip of these fiber cables a 2.5mm
The tester's tip fits fiber ends with a diameter of 2.5mm
Sending visible light through the fibers.
In case of fracture, the fiber cable will light up on the spot.
By healthy cable, light is visible at the opposite end of the fiber

The fiber cable tester for LC / MU connectors.
This type of fiber has a tip diameter of 1.25 mm
Test residue tip suitable for fiber cables with a tip diameter of 1.25mm
Transmitter visible light through the fiber
Tester fiber cable with LC connectors at both ends
Tester Pigtail fiber with LC in one end
Cable will light up when there is a rupture or crack.
in a healthy cable the light is seen only in the opposite end of the fiber cable.

Scan: Sends a tone over the cable that can be intercepted. Make it easy to find the right cable, among other cables.
Review Test: Sends a signal through each manager and shows where the signal comes out at the other end of the cable.
Battery: 2 x 9V (not included)

Residual sale

VGA screen tester controls max resolution
34 different patterns
can quick reveal of a monitor is with biiled error

Network Cable Tester

Tester for CAT 5, CAT 6 and CAT 7 connections

Functionality for ISDN networks

Powerd by 9V Battery (Not included)

Complies with WEEE and CE standards

Width: 105mm

Height: 100mm

Depth: 29mm

Weight: 180g

Cable insulation and crimping cable
Cable termination of RJ11, RJ12 and 8 pins RJ45
Cable review tests with LEDs included

Very useful tool for servicetekinikeren

Target for consumption on the USB port is borderline.
Portable USB voltmeter with LCD display
3-7V / 50-3500mA / 0-19999mAh < br> Voltage Tester and leave
USB2.0 interface

Fiber tester shows power and loss in a fiber cable
Used as remote unit for TEST-FIBER-PM-LS
Wavelength: 850nm, 1310nm, 1550 nm
Battery: 2 x AAA (included)

Fiber Tester. Measures how much loss there is in a fiber cable at the selected wavelength
3 x SFP ports (2 x Light Source, 1 x Power Meter)

SFP modules included:
650mm FP SC SFP
850mm VCSEL SC SFP
1310mm FP SC SFPT
1550mm FP SC SFP
FiTs Meter Module SC 850/1310/1490 / 1550mm
Purchase remote module TEST-FIBER-PM for measuring on mounted fiber cables