Torque-power measurement of e.g. fastner tools
can measure from 1Nm to 5 kNm - up to 500kg
No moving parts
Ideal for calibration of torque vrenches
Fits standard tool

low profile S-Beam load cells
only for pressure measurement (Tension)
Available in 17 variants from 22 N to 9 kN
Performance of 0.05%
Very large sensitivity
Temperature compensated Strain Gauges

Load cell with shaft for measuring torque
capacities from 0.1Nm to 1kNm
speed up to 15,000 rpm
± 5vdc output (± 10vdc optional)
12 - 28vdc supply
Contactless data transfer to Stator
Digital electronics with on-shaft shunt
0.2% Combined error
10 kHz Sample Rate
12-bit resolution
measurement of speed and angle

Reaction twist-load cells in miniformat
Available in 3 weight classes from 5 Nm to 50 Nm (44.3 lbf-in to 443 lbf-in)
proprietary interface
Temperature compensated Strain Gauges
Compact Size: 70 x 60 mm
Excellent linearity and repeatability
low deflection and high twisting stiffness
Order desired weight class

Mini button cell for pressure measurement - sealed.
Available in 8 weight classes
superior to any other button cell
integrated temperature compensation
Improved eccentric load rejection
multi-point calibration
integrated loading button
Small diameter
environmental supplies
heat-treated stainless steel

Load cell for tension - button cell model
capacities from 0.01 KN to 100 kN (2.25 LBF to 22.5K LBF)
Overload protected
Temperature compensated
small diameter
Environmental sealed IP60 or IP65
Stainless Steel

SMT Overload Protected S-Type Load Cel

• Proprietary Interface temperature compensated strain gages
• Overload protected in both tension and compression
• Safe overload to 10X capacity
• High performance
• Low creep
• 1 to 450 lbf

Overload protection: ± 400% of rated load
Temperature:
Temperature range: -10ºC to +45ºC
Temperature during use: -55ºC to +90ºC
Output Signal: 3.00 mV / V (nominal)
Supply voltage: 15 VDC
Cable length: 1.5 m
Dimensions: 130.3 x 50.8 x 31 mm
Weight: approx. 725 g
Linearity: ± 0.02% of rated load
Hysteresis: ± 0.02% of rated load
Reproducibility: ± 0.01% output

Top-class load cell - proven construction
Available in weight classes from 1.1 - 223Kn (100kg - 22 ton)
proprietary interface Temperature compensated strain Gauges
Performance for 0.03%
eccentric load compensated
Low deflection
0.0008% / ° F (0.0015% / ° C) temp. Effect on output
Barometric Compensation
Shunt calibration
E74 NIST trackable voltage and compression calibration (optional)

Explosion-proof Load Cell
EX certified - hermetically sealed
load cells for tension and compression, 2 ton
Suitable for the oil industry and the like.
Loop-powered with 4-20mA outputs signal
Precision: 0.05%

Load Cell for measuring torque on axle
can sit between power source and load
suitable for measuring electric cars etc.
capacity from 100Nm to 10kNm
simultaneous voltage and frequency on the output
Option with digital output via USB
Order required max. power and output format

Sovereign Linearity Specifications
Excitation Voltage: 3.3Volt
Resolution: 24bit
% FS: 0.0002
Measurement speed up to 2400 samples per. Second
High internal resolution (up to 500,000 Counts)
IP67 Searched cabinet
Battery powered (long battery life)
128 x 64 Graphic screen with backlight
More display modes (Peak / bottom, Delta, Live , gross and net)
logging and graphing for PC (software is included)
support Ted's template 33, 40 and 41
Live calibration and multi-point calibration
Dim: 170 x 94 x 42 mm
Weight: 330 grams

Handheld 7-digit LCD screen
4 Wire Full Bridge input
with Peak, Trough, Net, Overload and Shunt Cal Indication
Battery operation of 450 hours in power saving mode
Keys for ON / OFF , Interval Selection, Peak / Valley Hold and Gross / Net
Single Calibration (Direct mV/V) with double range for values ​​such as kg and lb
Weighing only 250 grams
IP65 / NEMA4
TEDs Enabled to automatic Sensor calibration (IEEE1451 - Template 33)
Buy Leather case
Battery: 2 x AA

Standard cell m / M8 x 1.25 gevind; Full load = 20 Kg

The standard load cell m / M8 x 1.25 thread
S-beam type
Full Load = 5 kg
Maximum load: 7.5kg

For 24 VDC supply

Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg

16-bit strain gauge / weighing bridge amplifier - datalogger
With temperature compensation
Excitation sense 2.5VDC
Bridge input: +/- 8mV Version: 16mV and 32mV
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc.: Software to configure, download, plotting, analysis and an alarm (not supplied)
Configurable alarm controls
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion

Single point celle m/M8 x 2,5 gevind; Fuld belastning=250 Kg