Quad screen segmentation with switch
4 x HDMI inputs 4K30Hz, 1080p/i
1 x HDMI output 4K30Hz, 1080p/60Hz
HDMI 1.4, HDCP1.4 and backwards compatible
Supports audio input
Bandwidth: 330MHz
Max. data rate: 10.2Gbps
In/out TMDS, DDC signal
Temp: -15 - +55°C
Supply voltage: 5VDC PSU included
Dimensions: 148 x 63 x 23 mm
Weight: 206g

Remote switch for 2 PCs and 1 HDMI monitor.
Button on the front or remote control can be used to select the PC input.

HDMI Multi Viewer (HD in, 4K out)
Support 8 HDMI inputs, one HDMI output
Support 8 HDMI signal screen segmentation
Support 8 HDMI single picture signal seamless switching
Support IR control
The input resolution support up to 1080P,720P,1080i,1024x768,1360x768 etc.
The output resolution support up to 1080P@60HZz 3840x2160@30Hz
Support audio and video superposition
HDMI input and output transmission distance:high speed HDMI cable can reach 15Mm
Power Adapter : DC12V/1A
Net weight:approx. 792 g
Size: 252mm x 105mm x 25mm

Perfect table box to the meeting room for viewing on a large screen
can be mounted under the table
6 x video inputs selected for 1 x output
4 x HDMI input
1 x DisplayPort
1 x VGA + audio
1 x HDMI output for local monitor
1 x RJ45 for remote receiver with HDMI out (extras)
Sending of CAT6a cable up to 100m in HD 1080p
4K UHD (3840 x 2160) up to 70m
Front panel push button and IR remote control or serial or GUI control
EDID and HDCP function
USB 2.0 port for Pass Through
Size: 135 x 100 x 40 mm

Video Bandwidth: 225 MHz / 6.75 Gbps to 8 x HDMI female 
Resolutions: 480i to 1080p
Audio: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sampling frequency of audio: 32 ~ 192 kHz
Outputs 8 x HDMI
8 x uncompressed AV and data

8 channel HDMI input module for Video MATRIX 
Video bandwidth: 225 MHz / 6.75 Gbps
Input ports: 8 x HDMI
video resolutions: 480i to 1080p @ 60Hz
Audio LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
Sampling frequency of audio: 32 ~ 192 kHz
integration module - plug-in

HDMI, HDCP and DVI compatible 32 x 32 MATRIX
Modular - input and output modules
Input and output modules can be mixed and added to 8 × 8 input module and output module
4 input and 4 output modules with HDMI, DVI
VGA module is only input
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA
480i to 1080p and 4K2K @ 24/25/30 Hz
Control of the matrix via the front panel, RS-232, Telnet, WebGUI controls
10 available preset settings
3 EDID modes: Standard, Dynamic and Manuel
Power supply with redundancy
HDMI cable up to 15 m
HDbaset 5Play ™ convergence support HD video, HD audio, PoC
Ethernet and IR / RS-232 control

4 x HDMI inputs for 1 HDMI output
The 4 inputs can be combined into 10 variants
Seamless switching of HDMI signal
Supports Audio switching
Resolution: up to 4K@30Hz input
Supports IR remote control
Push buttons on the front for output mode selection
Bandwidth: 6.75Gbps
Operating temperature: 0 - +40°C
Supply voltage: 12VDC PSU included
Power consumption: 8 Watts
Cable distances, max.: Input 8m, output 10m
Dimensions: 191 x 113 x 17 mm
Weight: 480g

HDMI Matrix over IP.
Video Wall configuration
Setup with DIP switches (TX-RX Pair)
Max 24 transmitters and 96 receivers (contact us for buying TX or RX units separately.) < br> HDMI 1.3, HDCP 1.3.
HDMI loop out to the local monitor
Resolution 1080p @ 60/50/30/25 / 24Hz, 720p @ 60 / 50Hz.
point to point over Cat 6. Maximum . 100meter. Point to many Hotels can be supplied via PoE (802.3af) or 12VDC 1A (PSU included).
Power Consumption: 2.5W.
Switch must support protocol: IGMP Snooping or IFMP.
Delay: 120ms
Operating temperature: 0 ~ 40 ° C.

16 port 4K HDMI Multi-Viewer
16 x HDMI in with 1080p
1 x HDMI out 4K @ 30Hz
HDMI 1.4, HDCP 1.4, DVI 1.0
PIP, PAP, Full Screen, Dual Mode and Quad Mode
Change via pushbutton or IR

Controller / video wall / splitter
Input: 1x Display Port, 1x HDMI + 1 Loopout, 1x DVI
Output: 4x HDMI
Supports HDMI, DVI, Display Port, VGA and YPbPr signals
4K / 2K HDMI
4K image split in 4 x HDMI outputs
PIP (picture in picture) and POP (side by side) multi function
HDMI audio
Supports YPbPr video via VGA input port as well as DVI-D, VGA & amp; HDMI by DVI-I input port
High end 3D motion
Managing via remote or RS232port

Mix HDMI video from 2 sources of 1 screen
PIP image in image
PBP image in picture
Screen layout (lock) function
Multi-format 2 in 1 out-switch
2-channel HDMI Video Swappable
Scales Resolution Up or Down
Up to 4K UHD (3840 x 2160 @ 30Hz, 4: 4: 4)
Audio out as Analog and Toslink SPDIF
Supports more than 40 Presets
Complete Video Control of Brightness, Contrast, Saturation, Tint, etc
OSD / IR / Button / Serial Interface
HDCP Compatible, 3D Video and Blu-Ray
Plug-N Play - System, No Software Installation
Supply: 12VDC

4 x HDMI inputs to 4 x HDMI outputs
Viewing the screens 4 are summarized on a screen
display screen 1 distributed over 4 skærme
Can used with DVI adapters

Connect up to 5 PCs or HDMI sources to 1 monitor
Remote control included
Switching with push button or remote control for HDMI 1.4 and HDCP 1.2
Resolution up to 1080i / 1080p
Power supply included 5VDC / 1.2A

Choose one of five HDMI signal input sources and send to a HDMI display.
manually or with the remote control to select the input signals.
30 / 36bit color depth.
Supports High Definition Audio: Dolby TrueHD, DTS-HD Master Audio
Auto signal enhancement feature can improve signal quality after long distance transmission
resolution up to 4K @ 30Hz
Supports 3D
Transferring CEC
Dimensions: 115 x 62 x 25 mm
Power supply: 5VDC / 1A supplied