CALL US NOW: +45 56 66 20 20
DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication devices that allow data communication between different network devices locally and the World Wide.
The network switch handles the flow of data across a network, also called back bone, by only sending a received network packet to the one or more devices to which the package is intended.
Each network device connected to a switch can be identified using the network address, the IP address, so that the switch can control the flow of traffic that maximizes network security and efficiency.
There are 2 basic versions of Ethernet switches, the simple ones -managed switches that route data to the ports that the telegrams want. The more advanced Ethernet switches are "managed" switches, where there are a lot of setup options to control and optimize the data flow and, not least, increase data security, also in the context of cyber crime protection. A switch can be built up with up to 7 "layers" which each have their task. For example, layer 3 is for controlling IP multicast (IGMP snooping - for example, video distribution), some router functions, IP routing at VLAN configuration.
The network switch is found everywhere and plays an integrated role in most modern Ethernet local area networks (LANs). Medium and large networks contain a number of managed switches. Small and small systems typically use an un-managed switch or the LAN ports that an Intenet Router is equipped with.
An Ethernet switch can be for both PDS cables (RJ45 cables) and optical fiber cables and many Equipped with ports for both cables.
DANBIT offers a host of different network switches, ranging from PoE Switch to industrial 24-port managed switch with built-in SFP ports. See the great selection here.
Layer 3 Managed Switch
8x Gigabit Ports
4x 10Gbps SFP Ports
Supports OSPF, RIP & Static Routing
VLAN, ACL, Syslog and more
Configuration: Console, Telnet/SSH or Web browser
Operating Temperature 0 ~ 50 C
IPv4 & IPv6 Routing
Power using AC cable
Dimensions 280 x 180 x 44mm
Weight 1622g
Unmanaged 10/100Mbps switch
Gigabit switch in robust metal housing
10/100 / 1000Mbit
230VAC supply voltage
Demo Item - Without Packaging or Accessories
Korenix Jetnet 5010g
7 x 10/100 RJ45 Ethernet
3 x 10/100/1000 RJ45 Ethernet / SFP Combo Ports (10/100 / 1000 Base- T, 100 base-eg, 1000 base-x)
supply voltage: 10.5 ~ 60 VDC
Operating temperature: -25 ~ 70 ° C
Compact 5 port Ethernet switch for 100Mbps
Not Managed
Very economical: max. 2 Watt
Supply voltage: 12 - 48VDC
Can also be powered with 24VDC
With redundant voltage input
Dimensions: 104 x 70 x 30 mm
Weight: 255 grams
IP30, metal housing
DIN bracket
Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS
Moxa Industrial Managed Switch ED6008
8 + 2 port PoE switch for DIN mounting
Un-managed
8 x 10/100/1000Mbit - RJ45 with auto MDI/MDI-X
PoE+ (30W) - power budget is 240 Watt
2 x SFP slot 100/1000Mbit fiber port
IP30 metal housing
DIN rail
Redundant Power input
48-54VDC / 7A, redundant, with polarity protection
Standard/extend switch 100/250 meter cable
6000VDC Ethernet ESD protection
Extended temperature -40 to 75°C
IEEE 802.3at
Dimensions: 152 x 106 x 66 mm
5-Port 10/100/1000BASE-T Gigabit Ethernet Switch
Plug-and-play operation without software installation.
VLAN isolation to prevent multicast or broadcast storms.
10 Gbps bandwidth and 9K jumbo frame support.
Features IEEE 802.3az energy efficient Ethernet standards.
Silent, compact and durable design.
Dimensions: 155 x 86 x 26 mm
Power supply: 5V DC, 1A
8-port 10/100/1000BASE-T Gigabit Ethernet switch.
Plug-and-play operation without software installation.
VLAN isolation to prevent multicast or broadcast storms.
16 Gbps bandwidth and 9K jumbo frame support.
Features IEEE 802.3az energy efficient Ethernet standards.
Silent, compact and durable design.
Dimensions: 168 x 93 x 32 mm.
Power supply: 100-240V AC, 50/60 Hz, 0.2A
5-Port 10/100/1000BASE-T Gigabit Ethernet Switch
Plug-and-play operation without software installation.
IEEE 802.1p and DSCP-based QoS for prioritizing critical applications.
10 Gbps bandwidth and jumbo frame support up to 9K.
Complies with the IEEE 802.3az Energy Efficient Ethernet standard and has a silent, fanless design.
Metal housing with MTBF of 52 years.
Dimensions: 94 x 100 x 27 mm
Power supply: 12V DC, 0.5A (6W)
4 x 10/100/1G/2.5GBASE-T RJ45 copper ports
2 x 10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X SFP
1 x RJ45-to-RS232 console interface for basic management and setup
DC 9 to 48V input or AC 24V input
DIN-rail and wall-mountable designs
IP30 aluminum case
Temperature -40 to +75 degrees C
2 x digital input (DI)
2 x digital output (DO)
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
IPv4 dynamic routing protocol supports RIPv2 and OSPFv2
IPv6 dynamic routing protocol supports OSPFv3
IPv4/IPv6 hardware static routing
Supports G.8032 ERPS (Ethernet Ring Protection Switching)
IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode
Supports IPv4 IGMP snooping v1, v2 and v3
Supports IPv6 MLD snooping v1 and v2
Switch Management Interfaces
SNMP Management
Managed Gigabit switch 2 x RJ45, 2 x Fiber
4 x RJ45 10/100/1000Mbps
2 x SFP 100/1000Mbps
Support ERPS (Ring protection)
IGMP/MLD Snooping (IPv4, IPv6)
Up to 256 VLAN groups
Support Cisco ether-channel (Static Trunk)
Port mirroring - up to 4 sessions
Supply voltage: 9 - 48VDC, 24VAC
Size: 135 x 88 x 32 mm
Temperature: -40 to +75°C
DIN-mounting
Det Norske Veritas Certified marine network switch DNV GL
Managed 8 port network switch approved for ships
8 x 10/100 / 1000Mbit Auto-MDI / MDIX to 4 x 1000Mbit SFP single mode or multimode
Supply voltage: 12 - 60VDC, 18Watt
Surge rotection, over voltage protection DC input
Dimensions: 162 x 122 x 50 mm
Weight: 860g
Operating temperature: -40 - +75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure
Det Norske Veritas Certified marine network switch DNV GL
Non-managed 5 port network switch approved for ships
5 x 10 / 100/1000Mbit Auto-MDI / MDIX
Supply voltage: 9 - 48VDC, 4Watt, polarity protected
Transient, surge protector DC input
Throughput: 1,488,000 pps at 1 Gigabit
Dimensions: 110 x 74 x 24 mm
Weight: 160g
Operating temperature: -40 - + 75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure
DNV GL Certified marine network switch
Non-managed 5 port network switch approved to vessels
5 x 10 / 100Mbit Auto-MDI / MDIX
Supply voltage: 18 - 30VDC polarity
Surge, surge protector DC input
Throughput: 148,880 pps at 100Mbit
Dimensions: 110 x 74 x 24 mm
Weight: 145g
Operating temperature: -40 - + 75 ° C
Moisture: 10-90% RH ( no condensation)
DIN fittings, metal enclosure
24 x 10/100/1000Mbit RJ45
4 x RJ45 1000Mbit shared with Port-1 to Port 4
4 x 10Gbit BASE-SR / LR SFP+ slots SFP
IP Stacking up to 6 units
Gigabit TP SFP and 10G SFP + interfaces
Hardware stacking up to 6 units
Switch series stacked in a logical unit
Stacking architecture supports redundant Ring mode
IPv4 IGMP / IPv6 MLD snooping v1, v2 and v3
MVR (Multicast VLAN registration)
Ethernet Ring Protection Switching
Supply voltage: 100 - 240VAC, 21Watt
Dimensions: 440 x 280 x 44 mm (1U)
Operating temperature: 0 - + 50 ° C
DIN bracket
Top Grade Managed Poe++ switch - for large scale network
Managed switch, 24 x RJ45 with PoE++ (95W) on all ports simultaneously.
PoE power budget of 2280Watt. No compromise
Double plug-in power supplies
24 x RJ45 10/100 / 1000Mbit with PoE++
PoE extended to 200meter
2 x 10GBase-T slot for 10Gbit / 1 Gbit SFP Module Single Mode or Multimode
2 x 10GBase-SR / LR SFP + slots (combo with 2 x SFP / RJ45)
Layer 3 managed switch - Professional Grade
multi cast support
ERPS to Ring IP monitoring - recovery time less than 10ms
DHCP relay / DHCP Server
Supports Cisco ether-channel (static trunk)
Dimensions: 440 x 300 x 44 mm (1U)
Weight: 5,5kg
Operating temperature: 0 - +50°C
Managed switch with Gigabit ports
8 x 10/100 / 1000BASE-T RJ45 ports with PoE +
Up to 36 watts for each PoE port
Total PoE power is 240Watt
2 x 100 / 1000BASE-X mini-GBIC / SFP
IGMP Snooping (Multicast)
Operating temperature: -20°C to 70°C
Can be wall mounted, magnetic wall mounted or DIN rail mounted
Supply voltage: 48-58DCV 5.7A max input (PSU not included)
Dimensions: 180 x 140 x 24.4mm
Weight: 686 grams
