8 x RJ45 PoE + 36W Gigabit
2 x SFP 100/1000 Mbit
10K Jumb frames
2M Packet Buffer
16K MAC address table
-40 to + 75 ° C
2,500.00 kr
Varenummer ESW10G-2SFP-P
DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication devices that allow data communication between different network devices locally and the World Wide.
The network switch handles the flow of data across a network, also called back bone, by only sending a received network packet to the one or more devices to which the package is intended.
Each network device connected to a switch can be identified using the network address, the IP address, so that the switch can control the flow of traffic that maximizes network security and efficiency.
There are 2 basic versions of Ethernet switches, the simple ones -managed switches that route data to the ports that the telegrams want. The more advanced Ethernet switches are "managed" switches, where there are a lot of setup options to control and optimize the data flow and, not least, increase data security, also in the context of cyber crime protection. A switch can be built up with up to 7 "layers" which each have their task. For example, layer 3 is for controlling IP multicast (IGMP snooping - for example, video distribution), some router functions, IP routing at VLAN configuration.
The network switch is found everywhere and plays an integrated role in most modern Ethernet local area networks (LANs). Medium and large networks contain a number of managed switches. Small and small systems typically use an un-managed switch or the LAN ports that an Intenet Router is equipped with.
An Ethernet switch can be for both PDS cables (RJ45 cables) and optical fiber cables and many Equipped with ports for both cables.
DANBIT offers a host of different network switches, ranging from PoE Switch to industrial 24-port managed switch with built-in SFP ports. See the great selection here.
8 x RJ45 PoE + 36W Gigabit
2 x SFP 100/1000 Mbit
10K Jumb frames
2M Packet Buffer
16K MAC address table
-40 to + 75 ° C
Managed Industrial Gigabit switch. 24 x RJ45, 4 x SFP slot
20 Port 10/100/1000T and 4 Port Gigabit TP / SFP Combo Managed Switch
20 x 10/100/1000Mbit RJ45
4 x 100/1000Mbit SFP slot
Cyber Security
Layer 2 to Layer 4 switch
IGMP snooping
MLD snooping
Dimensions: 440 x 200 x 45 mm (1U)
Weight: 3.3kg
Supply voltage: 100 ~ 240VAC
Operating temperature: 0 - +50°C
Real Ring, Redundant Ring of critical network
IEEE 1588 Time Protocol, supports MEF service and synchronous Ethernet
Supports MODBUS TCP protocol
Supports IGMP Snooping to 4 x 10/100 / 1000Mbps RJ45 ports
2 x 100 / 1000Mbit SFP ports
12 - 48VDC, redundant input
24VAC supply voltage is also possible
IP30 metal housing with DIN bracket
temperature range from -40 to + 75 ° C
Managed Industrial Fiber Switch to Network Back-Bone
24 Ports Managed Switch
24 x 100 / 1000Base-X SFP Mini-GBIC / SFP Slots
4 x 10Gbit SFP + Slots
4 x 10 / 100 / 1000Base-T RJ45 Ports, Shared with Port-1 to Port-4
Cyber Security
IGMP Snooping
ERPS Fast Recovery Ring, Redundant
1588 Time Protocol for Time Synchronous Between Switche < Br> Objective: 440 x 200 x 45 mm (1u)
Temperature: -10 - + 60 ° C at AC supply
temperature: -40 - + 75 ° C at DC supply
supply voltage: 100 - 240Vac
supply voltage: 36 - 60VDC 1.2a
Unmanaged 5 port Ethernet switch
5 x 10/100/1000Mbit, RJ45
Operating temperature: -40 - +70 °C
10 - 30VDC
Unmanaged 6 port industrial switch
6 x RJ45 10 / 100Mbit
Redundant PSU input
Unmanaged 5 port 10/100/1000Mbit
Redundant power input
9 - 48VDC
24 VAC
24 ports 10/100/1000Mbit non managed Ethernet switch - 48Gbit/s.
100 - 240VAC PSU indbygget
Metalchassis.
Rackbeslag medfølger.
16 port Gigabit unmanaged Ethernet switch
100 - 240VAC PSU is built in.
Metal chassis.
Rack mount included
Managed switch. 8 x SFP, 2 x RJ45 ports
8 x fiber ports - 100/1000Base-SX / LX mini-GBIC SFP slots
2 x copper ports - 10/100/1000Mbit RJ45
IP30 enclosure
DIN rail and wall mounting
24:02 48V DC, redundant power
Can accept 24VAC
-40 to +75°C operating temperature
Dimensions: 152 x 107 x 72 mm
Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x ST fiber 100Mbit Multi Mode
IP50
4x 30W 56VDC IEEE802.3at PoE port
1x 56/24VDC PoE port
1x SFP Port
2x 48-56VDC Indgang
Driftstemperatur -40°C - 75°C
10/100/1000Mbps Data Rates
Total Power Budget 120W
Unmanaged Switch
2 x RJ45 port 10/100/1000Mbit
2 x 100/1000X SFP-port
Samlet PoE effektbudget: 120W
2x60W PoE ELLER 1x90W PoE+1x30W
PoE standart: IEEE 802.3bt
IP67, IK10
Driftstemperatur: -40°C ~ 65°C
Option: PoH 100W / Managed
Unmanaged Switch
4 x RJ45 PoE++ port 10/100/1000Mbit
2 x 100/1000X SFP port
PoE standard: IEEE 802.3bt
Total PoE power budget: 250W
4x60W PoE OR 2x90W PoE+2x30W
IP67, IK10
Operating temperature: -40°C ~ 65°C
Option: PoH standard 100W per gate
Unmanaged 5 Ports IndustriSwitch
4 x RJ45 10 / 100mbit
1 x SC Fiber 100Mbit Single Mode
IP30
8 port 10/100/1000Mbit unmanaged switch in mini format.
Powered from PoE or 5VDC (PSU not included).
Additional purchases, if any DC5V/2A-RQ power supply.
Does NOT have PoE out.
Dimensions: 155 x 86 x 26 mm
Weight: 378g
Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x SC fiber 100Mbit Single Mode
IP50
Unmanaged 5 Ports Industriswitch
4 x RJ45 10/100Mbit
1 x St Fiber 100Mbit Multi Mode
IP40
8-port Unmanaged 10 / 100M + 2-port Gigabit RJ45
2 x 1000BASE-X mini-GBIC SFP combo interface
PoE + is 32 Watt
Total PoE power is 120 watts
IEEE 802.3af / to End-span
Each port provides 52VDC to PoE equipment
Auto deteketere PoE equipment
Provides power to the max. 100meter
Extended mode without PoE, the distance up to 250meter
Equipped with smart LCD
Normal, VLAN, Extend
Supply voltage: 100 - 240VAC
Dimensions: 280 x 180 x 44 mm (1U)
4 x 10/100 / 1000Mbit RJ45 not managed switch with PoE
2 x 10/100 / 1000Mbit RJ45 Uplink ports
PoE is 54VDC
PoE provides 30 Watts per port (4 ports)
Max. 55 Watts total PoE
Autodetekterer PoE devices
56VDC, 60 Watt - PSU included