Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting

Få 4 stk. RS232 porte på PC via USB porten

Forbind 4 x RS232 enheder til USB port
Metal kabinet og med vægmontering
Baudrate op til 115,2 kbit/s
Supporterer ikke hardware licens nøgler

Supporting Win10

Get 2 pcs. COM ports on the PC through USB port
Separate USB cable AM ​​and BM
Supporting Win7 / 8
Cable included

Connect RS232/RS422/RS485 equipment to USB port
Baudrate up to 921,6 kbit/s
Select type of port by DIL switch
Supports Win7/8/10, MAC

RS232 - 08/07 bit
Max. 115.2 kbit / s
FTDI chip - FT232xx.
Does not work with software license dongles
With internal jumper getting + 5VDC on pin 9
1 meter USB cable
Supports Win10 < / p>

CAN bus port on your computer via USB 1.1, 2.0 or 3.0 port
Powered from USB port
LED shows initialization and CAN bus status
Installs as a standard Windows COM port
CAN modes: Standard, Listen, Echo
Controlled using ASCII commands
API provided along with examples
Plug and play installation
CAN bus speed up to 1 Mbps
Supports CAN 2.0A and CAN 2.0B protocols
Drivers provided for Windows and Linux OS
Supports SocketCAN (slcan driver) since kernel 2.6.38+

USB 2.0 to 4 x RS232/422/485
High-Speed serial ports 921.6kbps
Driver for Windows, Linux, Mac OS X
LEDs for Power and TxD/RxD activity
ESD protection on USB and serial ports
2.5kV electrical isolation (ISO version only)
Bus powered (non-ISO), Self powered (ISO version)
Wide range of power input 9 - 54V DC
Metal housing
19-inch rack and wall mounts
Wide range of operating temperatures

4-Port RS-232/422/485 USB tilSeriel Adapter, metal kabinet med forlængerkabel. Til DIN skinne montering.

• Plug & Play
• DB37 forlængerkabel til 4 DB9 serielporte
• Metal kabinet.
• 4 X RS232/422/485 porte
• High speed serielport baud rate optil 921.6K bps
• 128 byte transmit FIFO & 384 byte receive FIFO

USB til 4 ports konverter med DB9 stil til DIN skinne montering.

• Med USB kabel og strømforsyning.
• Metal kabinet.
• 4 X RS422/485 porte
• Hastighed: optil 921.6 Kbpz
• 4 X DB9 hanstik

Get 1 piece. x RS485 or RS422 port via adapter connected to PC's USB port
Galvanic isolation (optical), 2KVolt
Baudrate up to & nbsp; 921.6 Kbit / s
Windows Win 7/8, Vista, Linux & Server 2000 to Server 2016 (WHQL certified)
Linux Kernel 2.4
Mac OS X 10.9, Driver Approved by Apple

Two 16550 High performance UART (RS232) serial channels
Occupies one PCI or PCIe bus slot
Low Profile PCI Form Factor
Includes Low Profile PCI & Regular size PCI two brackets
Both USB A type and USB pin header connector on board to host connection
One RS232 DB9M and one RS232 10pin RJ45 serial ports on board
Includes one 10pin RJ45 – DB9M Bridge cable for 2nd DB9M port
5VDC Power output from each DB9M Port for POS device use application
2 Jumpers Individually enable / disable 5VDC output for each DM9M Port
On Board Molex mini 4Pin Power connector for sufficient DB9M 5V bus power from PC power supply
Supports 32bit/64bit Windows 7, Vista, XP, 2000, ME, 98SE

USB-C to serial RS232 adapter cable
USB type C male to 9-pin RS-232 male connector with thumb screws
Data transfer speed 1 Mbps+
Supports remote wake-up and power etc
1.5 meters

RS232 for USB printer adapter cable
connect USB printer to PC com port
automatic baud rate 
power supply included
DB9 female and USB B
Supply voltage: 5VDC 100mA
GDI printers (without own emulation) are not supported 
See list of supported printers under Downloads

MOXA USB to RS422/485 converter
Galvanically isolated.
1-port RS-422/485 USB-to-serial converter
Compatible with USB 2.0
12 Mbps USB data rate
921.6 kbps maximum baud rate for super fast data transmission
Drivers provided for Windows, Windows Server, WinCE, and Linux
Mini DB9 female to terminal block adapter for easy wiring
LEDs for indicating USB and TxD/RxD activity
15 kV ESD protection for all serial ports
2 kV electrical isolation
Supports Windows 11