CALL US NOW: +45 56 66 20 20
Here you will find DANBIT's selection of USB to RS232 - both as cables and adapter.
The interface standard for serial transmission, RS232, was adopted in 1969. However, before and after adoption, this interface has been so popular that several variants have arisen. In various ways, they have attempted to burst the limits set by RS232 in terms of cable length and speed, where the current limit is 15 meters, while the transmission rate is at most 921.6 Kbit / sec for RS232.
To break the 15 m limit, the RS422 recommendation was adopted. It shows how using balanced signals can be communicated over distances up to 1200 meters and up to 10 Mbit / sec. While RS232 is about the connection between one transmitter and one receiver, "point to point", then from each output on RS422 data can be communicated to 10 inputs. In practice, however, almost all RS422 interfaces are used for point-to-point connections. Only with the RS485 standard was there a recommendation in 1983 that shows how both more transmitters and several receivers can communicate over a few transmission lines.
USB A to Straight-Through RS232 serial adapter
With DB9 male
With 9 x data monitoring LEDs (TX, RX, PWR)
COM port assignments are maintained across reboots
Max Baud Rate: 921.6 Kbps | 1, 1.5, 2 stop bits
Odd, Even, Field, Space, No Parity Mode
Hardware Flow Control (CTS/RTS and/or DSR/DTR)
Software Flow Control (XON/XOFF) | Chipset: PL2303-GC
Compatible with Windows®, Mac OS and Linux
USB A to Straight-Through RS232 serial adapter
With DB9 male
With 3 x data monitoring LEDs (TX, RX, PWR)
COM port assignments are maintained across reboots
Max Baud Rate: 921.6 Kbps | 1, 1.5, 2 stop bits
Odd, Even, Field, Space, No Parity Mode
Hardware Flow Control (CTS/RTS and/or DSR/DTR)
Software Flow Control (XON/XOFF) | Chipset: PL2303-GC
Compatible with Windows®, Mac OS and Linux
USB-C to Straight-Through RS232 serial adapter
With DB9 male
With 9 x data monitoring LEDs (TX, RX, PWR)
COM port assignments are maintained across reboots
Max Baud Rate: 921.6 Kbps | 1, 1.5, 2 stop bits
Odd, Even, Field, Space, No Parity Mode
Hardware Flow Control (CTS/RTS and/or DSR/DTR)
Software Flow Control (XON/XOFF) | Chipset: PL2303-GC
Compatible with Windows®, Mac OS and Linux
USB-C to Straight-Through RS232 serial adapter
With DB9 male
With 3 x data monitoring LEDs (TX, RX, PWR)
COM port assignments are maintained across reboots
Max Baud Rate: 921.6 Kbps | 1, 1.5, 2 stop bits
Odd, Even, Field, Space, No Parity Mode
Hardware Flow Control (CTS/RTS and/or DSR/DTR)
Software Flow Control (XON/XOFF) | Chipset: PL2303-GC
Compatible with Windows®, Mac OS and Linux
MOXA, 1-port RS-232 USB to serial adapter.
Compatible with USB 2.0 and 12 Mbps USB data rate
921.6 Kbps maximum baud rate for super fast data transfer
Drivers are provided for Windows, WinCE and Linux
DB9 male. USB2.0 with 80cm cable
LEDs for displaying USB and TxD / RxD activity
15 KV ESD protection for all serial ports
OS support: Windows 11, 10, 8.1, 8, 7, Vista, ME, and XP Windows Server 2022, 2019, 2016, 2012 R2, 2012, 2008 R2, 2008, 2003, 2000, and NT
Få en COM-port på PC via USB porten
MOXA USB to RS232/422/485 converter.
Kompatibel med USB 2.0
Software selectable RS232, RS422, 4-wire RS485 and 2-wire RS485
Certified drivers for Windows, WinCE 5.0 and Linux
15 KV ESD protection
Supporting Win10
Get a COM port on the Android Tablet or Android phone via USB port
Connect 1 x RS232 equipment to Android Tablet / phone
Connect to micro USB port on the Tablet / Phone
Baud rate up to 921.6 kbit / s
USB 2.0 to RS232 / Serial / DB9 adapter cable
Supports USB2.0 / 1.1 and 1.0
Prolific Chipset
8.7
bit OS Support WIN XP / 2000/98/7 / 10.8, linux and Mac
60 cm cable
Get a COM port on the PC via the USB port
USB to RS232 7 or 8 bit
RS232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Up to 921.6 kbit/s - FTDI chip
DB9 male
With thumb screws
Fits equipment with COM port
USE THE INCLUDED DRIVER!
Get a COM port on the PC via the USB port
USB to RS232, galvanic isolation
Transmits TxD, RxD and GND only
Supporting Win10
Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting
Få 4 stk. RS232 porte på PC via USB porten
Forbind 4 x RS232 enheder til USB port
Metal kabinet og med vægmontering
Baudrate op til 115,2 kbit/s
Supporterer ikke hardware licens nøgler
Supporting Win10
Get 2 pcs. COM ports on the PC through USB port
Separate USB cable AM and BM
Supporting Win7 / 8
Cable included
Connect RS232/RS422/RS485 equipment to USB port
Baudrate up to 921,6 kbit/s
Select type of port by DIL switch
Supports Win7/8/10, MAC
RS232 - 08/07 bit
Max. 115.2 kbit / s
FTDI chip - FT232xx.
Does not work with software license dongles
With internal jumper getting + 5VDC on pin 9
1 meter USB cable
Supports Win10 < / p>