Previous
Next

Temperature and humidity meter with RS485. -20 - +60°C, 5 - 95%RH. Modbus RTU. 12-16bit resolution. IP54

Product number TSH330Category Data logning / Data collection / Measurement
1,587.00 kr
Ekskl. moms

RS485 Modbus RTU combi sensor

Temperature: -20 - +60°C +/-0.6°C

Resolution: 0.1°C

Humidity: 5 - 95% rH +/- 5%

Resolution 0.1%rH

IP54 plastic housing, very robust

Up to 32 sensors on the same RS485 bus

16 bits at temperature

12bit when wet

Supply voltage: 4.5 - 26VDC / 25mW

Dimensions: 74 x 66 x 36 mm

Get Volume Offer
close

Get Volume Offer

 
file_download DOWNLOADS
Ask a question
close

Stil et spørgsmål

 

The TSH330 is an IP54 temperature and humidity sensor with RS-485 interface. It supports Modbus RTU protocol. The temperature and humidity sensor integrates the basic elements plus signal processing and provides a fully calibrated digital output. A unique capacitive element is used to measure relative humidity, while the temperature is measured by a band gap element. Both elements are seamlessly coupled to a 12-bit analog to digital converter. This results in superior signal quality.

The digital sensor is mounted in an IP54 rated housing with a sintered filter. This provides protection against dust and water jets. A cable gland with lock nut and screwless terminal block provides easy cable installation.


Download technical info from the manufacturer's website:

https://www.teracomsystems.com/sensors/ip54-temperature-and-humidity-sensor-tsh330/