Welcome to DANBIT IT Professionals
B2B – Business to business only
8 single ended input +/- 10V analog, +/- 5V
200kS / s (200 kHz) for each channel sampling rate
FIFO 2000 is sampled - the memory of 30 million data samples
16bit solution
Trigger mode: SW, Ext. clock, digital falling edge (post, pre, delay), analog
1 x 32-bit counter, max. 30 kHz
4 x digital input (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm
Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C
Forsyning | PoE eller 12 - 48VDC, 2,6Watt |
---|---|
Hastighed | 200kHz sample-frekvens for alle 8 indgange |
Indgang | 4 stk. wet (forsynes med spænding) op til +30VDC 8 x single-ended (fælles stel) analoge high-speed indgange |
Kabinet | Metal, Din-beslag og vægmontering |
Mål og vægt | 120 x 76 x 38 mm, 350g |
Porte | 1 x RJ45 PoE (PD) |
Trigger | 1,5 microsekund, Falling Edge, 5VDC on, 0,8VDC off |
Tæller | 1 kanal, 32 bit, 30KHz |
Udgange | 4 stk. Open Collector, maks. +30VDC, 100mA |
ETHIO8AI8IO-P-I is a data monitoring device at high speed with a built-in Ethernet communications port for data transfer over a network and includes 8 pieces. high-speed 16-bit analog input channels (200 kHz sample and hold for all 8 channels), four digital input channels, and four digital output channels. The module provides a programmable input range on all analog channels (± 5 V and ± 10 V), and the digital output can be set to output the short-circuit and overload protection. The counter value of the 4-channel-DI counters low-speed, one-channel high-speed counter is locked by the ADC sampling time synchronism. ETHIO8AI8IO-P-I provides also 4kV ESD protection as well as 2500 VDC isolation within the module.