Welcome to DANBIT IT Professionals
B2B – Business to business only
4 single ended input +/- 10V analog, +/- 5V, +/- 2.5V ... +/- 20mV
128kS / s for each channel sampling rate
FIFO: 4000 samples - memory 30 million data samples
24bit resolution
2 x analog output +/- 10V, +/- 5V, 0-5 / 10V
analog output 12bit resolution
Trigger mode: SW, Ext analog
1 x 32bit counter, max. 30kHz
1 x Encoder input: Qadrant / CW / CCW and pulse
3 x digital inputs (wet) up to + 30VDC
4 x digital output (Open Collector) up to + 30VDC, 100mA
Overload protection up to 1.3A
1 x Ethernet port RJ45
Security: ID, password and IP filter
Powered by the PoE or 12 - 48VDC, 2,6W
Dimensions: 120 x 76 x 38 mm | Housing: Metal, with DIN bracket
Operating temperature: -25 - + 75 ° C
Forsyning | PoE eller 12 - 48VDC, 2,6Watt |
---|---|
Hastighed | 128kHz sample-frekvens for alle 4 indgange |
Indgang | 3 stk. wet (forsynes med spænding) op til +30VDC 4 x single-ended (fælles stel) analoge high-speed indgange |
Kabinet | Metal, Din-beslag og vægmontering |
Mål og vægt | 120 x 76 x 38 mm, 350g |
Porte | 1 x RJ45 PoE (PD) |
Trigger | 1,5 microsekund, Falling Edge, 5VDC on, 0,8VDC off |
Tæller | 1 kanal, 32 bit, 30KHz |
Udgange | 2 x analog udgang med fælles stel, 12 bit opløsning 4 stk. Open Collector, maks. +30VDC, 100mA |
ETHIO4AI2AO7IO-PI is a data monitoring device at high speed with a built-in Ethernet communication port for data transfer over a network and includes four high-speed 24-bit differential analog input channels (128 kHz sample and hold for all 4 channels), two analog output channels, 3 digital input channels, four digital output channels and 1 encoder-input channel.
the module provides a programmable input range on all analog channels and the digital output can be set to output the short-circuit and overload protection. 1 Encoder input channel can be configured as Quadrant, Pulse / Direction or CW / CCW input mode. ETHIO4AI2AO7IO-P-I also provides 4 kV ESD protection and 2500 VDC intra-module isolation. In addition, include 24-bit ADC built Sinc3-filtering to adjust the appropriate sampling rate and filter the modulator signal and noise. ETHIO4AI2AO7IO-P-I is very suitable for a variety of applications for mobile / portable measurement, but also for precision signal measurement.