Previous
Next
Intelligent CAN BUS 2.0A and 2.0B to 10/100 Base- TX Ethernet / Modbus TCP/IP / Modbus RTU Convert
3,674.00 kr
Ekskl. moms
Intelligent Can For Modbus TCP / IP Converter
Supports both CAN specification 2.0A and 2.0B
Maximum transmission speed up to 1M BPS for CAN and 115.2 Kbps for RS-232 RS-485
Maximum transmission distance on CAN over 1000m (Follow the CAN specification)
7-segment LED display for module IP, RS-232 Baud rate, CAN configuration ...
Supports Web Configuration
Supports Maximum 24 Ethernet clients Connection
Modbus TCP / RTU command for reading and writing CAN message
Transparent communication between the CAN devices via Ethernet
30 Specific CAN IDs in Modbus TCP / RTU Mode
DIN mounting
Quantity
Physically in stock
Ask a question
close
Specifications
| Andet | Terminator Resistor Jumper for 120 Ω terminator resistor Specification ISO-11898-2, CAN 2.0A and CAN 2.0B |
|---|---|
| Dimensioner | 72mm x 122mm x 33mm (W x L x H) |
| Driftstemperatur | -25 ~ 75 ℃ |
| Ethernet | 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX) Connector RJ-45 with LED indicator |
| Forsyning | Unregulated +10 ~ +30 VDC |
| Isolation | 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Montering | DIN-Rail |
| Porte | COM 1 RS-232 COM 1 Connector 5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND ) COM 2 RS-485 (Self-turner inside) COM 2 Connector 2-pin screwed terminal block (DATA+, DATA-) |
| RAID niveau | CAN, Ethernet, Modbus RTU, Modbus TCP |
| Stik | CANBUS: Connector 2-pin screwed terminal block (CAN_L, CAN_H) |
M485-Eth-Can-MTCP is useful for data exchange between Modbus devices and CAN devices. M485-Eth-Can-MTCP is a Modbus TCP server and acts as a slave unit in Modbus RTU network. It supports four communication modes: Modbus TCP, Modbus RTU, Can-Ethernet Convert and Pair Connection.
The main function of the M485-Eth-Can-MTCP is Can for Modbus TCP / RTU gateway. It allows Modbus TCP / RTU to communicate with CAN device on a CAN network. M485-ETH-CAN-MTCP supports the function codes 0x03 / 0x04 / 0x10 for Modbus TCP / RTU for reading and writing CAN messages.
In addition, the device supports a transparent, protocol independent transfer of CAN messages, Which enables the implementation of it in a wide range of possible applications. Furthermore, the Can-Modbus converter can be used with various higher layers of can protocols (eg. Canopen, DeviceNet or other proprietary protocols).
Andre produkter i samme kategori:
Previous
Next