Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Previous
Next
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S
Measurement of temperature and humidity via network, 2 x DI and 2 x RO - DANBIT A/S

Remote control and measurement via Internet/LAN, 2xDigital input, 2xAnalog, 2xRelay output, 1-wire sensor input, 10 - 14VDC

Product number TCW122B-CMCategory Teracom Systems / Datalogning and conrol
1,030.00 kr
Ekskl. moms

Module with smart temperature and humidity measurement and control

Password protected Web based configuration and control

1-Wire interface for 2 temperature sensors

2 x analog inputs from 0 to 60VDC - 10bit resolution, 100mV display

2 x digital inputs with "dry contact" and "logic level" mode

2 x relay outputs with NO/NC contacts

Email transmission upon alarm

SMTP with authentication (SSL/TLS is not supported)

SNMP v.1

SNMP traps generated alarm

HTTP and XML API commands

Remote firmware update

Supply voltage: 10 - 14VDC

Quantity
Physically in stock
LÆG I KURV
Get Volume Offer
close

Get Volume Offer

 
file_download DOWNLOADS
Ask a question
close

Stil et spørgsmål

 

TCW122B-CM is a remote IO module for environmental monitoring and control, designed to operate in Ethernet networks. It can be managed by WEB interface, SNMP programs and user applications.

Remote IO module has two relays with normally open and normally closed contacts. Both relays can be activated locally - from the status of monitored parameters or remotely - using WEB interface, SNMP handlers and HTTP/XML API commands.

TCW122B-CM supports 1-wire interface. Up to two temperature or humidity temperature sensors can be connected. Along with ambient parameters, two analog voltages and the status of two digital inputs can be monitored. For each parameter, email and/or SNMP trap can be sent for any alarm condition.

The controller can be used as a standalone unit or as part of data acquisition systems (SCADA).

Andre produkter i samme kategori:

Previous
Next