Teracom TCW181B-CM with 8 relay NO and NC contacts with up to 3Amp, either AC or DC current.

Remote control via Internet/LAN, 1 x Digital input, 8 x Relay outputs, 10 - 14VDC

Name: Remote control via Internet/LAN, 1 x Digital input, 8 x Relay outputs, 10 - 14VDC
Brand: Danbit A/S
SKU: TCW181B-CM
Price: 1200 DKK
Availability: InStock

Product number TCW181B-CMCategory Teracom Systems / Datalogning and conrol

1,200.00 kr

Ekskl. moms

Module with password protected Web based configuration and control

1 x digital input with "dry contact" or "logic level" mode (max. 5.5VDC)

8 x relay outputs with NO/NC contacts (3Amp)

SNMP v.1 support

SNMP traps conditional alarm sending

Email transmission upon alarm

SMTP with authentication (SSL/TLS is not supported)

XML and HTTP API commands

Remote firmware update

Robust DIN-Rail/wall mounting.

Supply voltage: 10 - 14VDC

Quantity

Physically in stock

Get Volume Offer DOWNLOADS

Ask a question

TCW181B-CM is an 8-channel Ethernet digital IO module. The device can be controlled via WEB interface, SNMP programs or user application over HTTP/XML API commands. It can be used as a standalone module or as part of control and monitoring systems.

The TCW181B-CM IO module has eight relays with normally open and normally closed contacts with up to 3Amp, either AC or DC current. All eight relays on the device can be activated independently or simultaneously. Supported M2M protocol - SNMP v.1 makes the TCW181B-CM a good choice as a control unit of systems with SNMP management software.

The Ethernet digital IO module supports one digital input, which can operate in either "dry contact" or "logic level" mode. The choice is hardware-settable using a jumper near the input. Each change in the status of the input can generate an email or SNMP trap if this feature is enabled.

Download technical info from the manufacturer's website:

https://www.teracomsystems.com/ethernet/digital-io-module-tcw181b-cm/